jtag> cable parallel 0x378 IGLOO
Initializing Excelpoint IGLOO JTAG Cable on parallel port at 0x378
jtag> detect
IR length: 5
Chain length: 1
Device Id: 01010010011110100101000011001011
  Manufacturer: Analog Devices
  Part:         BF533
  Stepping:     5
  Filename:     /usr/local/share/jtag/analog/bf533/bf533
jtag> initbus bf532_bf1
jtag> print
No. Manufacturer              Part                 Stepping Instruction          Register  
---------------------------------------------------------------------------------------------
   0 Analog Devices            BF533                5        BYPASS               BR        


Active bus:
*0: Blackfin BF532 compatible bus (with SPI bus) driver via BSR (JTAG part No. 0)
        start: 0x00000000, length: 0x100000000, data width: 16 bit
jtag> detectflash 0
Query identification string:
        Primary Algorithm Command Set and Control Interface ID Code: 0x0002 (AMD/Fujitsu Standard Command Set)
        Alternate Algorithm Command Set and Control Interface ID Code: 0x0000 (null)
Query system interface information:
        Vcc Logic Supply Minimum Write/Erase or Write voltage: 2700 mV
        Vcc Logic Supply Maximum Write/Erase or Write voltage: 3600 mV
        Vpp [Programming] Supply Minimum Write/Erase voltage: 11500 mV
        Vpp [Programming] Supply Maximum Write/Erase voltage: 12500 mV
        Typical timeout per single byte/word program: 16 us
        Typical timeout for maximum-size multi-byte program: 0 us
        Typical timeout per individual block erase: 1024 ms
        Typical timeout for full chip erase: 65536 ms
        Maximum timeout for byte/word program: 256 us
        Maximum timeout for multi-byte program: 0 us
        Maximum timeout per individual block erase: 4096 ms
        Maximum timeout for chip erase: 262144 ms
Device geometry definition:
        Device Size: 4194304 B (4096 KiB, 4 MiB)
        Flash Device Interface Code description: 0x0002 (x8/x16)
        Maximum number of bytes in multi-byte program: 1
        Number of Erase Block Regions within device: 2
        Erase Block Region Information:
                Region 0:
                        Erase Block Size: 65536 B (64 KiB)
                        Number of Erase Blocks: 63
                Region 1:
                        Erase Block Size: 8192 B (8 KiB)
                        Number of Erase Blocks: 8
jtag> spidetectflash 0
SPI FLASH:
        Manufacturer ID: 20
        Memory type: 20
        Memory capacity: 17 (8388608 bytes)
        Chip: STMicroelectronics M25P64
jtag>